What is Bending Process
Release Time：
2024-11-06 18:03
Bending is the use of pressure to force the material to produce plastic deformation, so as to form a certain angle and curvature of the shape of a sheet metal stamping process. Commonly used bending including V-shaped bending, Z-shaped bending and reverse folding and flattening.
In general, there are two methods of sheet metal bending: one method is die bending, for more complex structure, smaller volume, high-volume processing of sheet metal structure; for processing a larger amount, the size is not too large structural parts (general situation for the 300X300), the processor is generally considered to open the stamping die processing. Die bending mold is installed in the press.
Another is the bending machine bending (free bending), for processing the structure of the larger size or yield is not too large sheet metal structure. The mold for bending machine bending is naturally installed on the bending machine.
These two types of bending have their own principles, characteristics and applicability.
Related News
MYD METAL
MYD Metal specializes in the customization of various sheet metal stamping parts and precision springs.
PRODUCTS & SERVICES
Sheet metal stamping
Springs and various wire forming products
Brackets, chassis plates, mounting fixture parts Sheet metal manufacturing products
Battery contacts, electrical contacts, terminals Metal clips, flat spring parts
Optical and electronic high precision metal parts
CONTACT US
Tel.: +86 19129077635
Fax: +86 19129077635
Phone: +86 19129077635
E-mail: info@zsmyd.com
Whatsapp : +86 19129077635
Add : No.5 Century Three road, Torch Development District, Zhongshan city, China
INQUIRY
