Introduction to common processes in sheet metal fabrication

Release Time:

2024-03-22 14:05

With the advancement of industry, sheet metal parts are widely used in our daily lives. All kinds of daily utensils use a variety of sheet metal parts. Every link in the sheet metal processing process is very important. Problems in one link will affect the processing quality of the product. Therefore, every detail in the sheet metal processing process It has to be perfect so that we can make sheet metal parts of good quality.
Sheet metal processing and stretching process:
During sheet metal processing, it is sometimes necessary to unfold the stamping material, which is called stretching. Stretching is mainly for some sample materials with special requirements. The thickness of the stretched material changes. Generally speaking, the original thickness is maintained in the center of the bottom, the material becomes thinner at the rounded corners at the bottom, the material becomes thicker near the flange at the top, and the material becomes thicker at the rounded corners around the rectangular stretched piece.
Sheet metal processing and forming technology:
Forming refers to the final sheet metal part formed after a series of processing procedures such as blanking, flanging and tapping, punching, riveting, bending, and welding, etc., and then surface treatment. Forming is the final form of sheet metal processing. If there are special requirements, multiple parts should be combined in a certain way.

Related News