What do we recommend for mold prevention?
1. Cleaning stainless steel products to do anti-mold treatment.
Some finished products, semi-finished products stored in the rainy season for about a week will appear moldy, this situation, it is recommended that the final cleaning process of stainless steel products add water-based anti-mold agent
In the cleaning water, add and stir well, stainless steel products will be cleaned in accordance with the normal process. 2.
2. In the packaging can also do anti-mold treatment
a. Directly use anti-mold non-woven bags to package stainless steel products, and then put the right amount of anti-mold desiccant in the bag. Choose different sizes of anti-mold desiccant according to the size of the package.
Or choose anti-mold package, moisture absorption while releasing anti-mold factor sterilization.
b. In the outer box of the package, according to the size of the space to put strong anti-mold deodorant tablets.
3. Warehouse environment control
a. It is recommended to pack stainless steel products into the warehouse, not directly stacked on the ground, using pallet separated, and should not be too close to the wall, it is recommended to maintain a distance of 15-20cm.
Properly retain the channel to allow air circulation, otherwise produce vortex, resulting in the formation of water vapor.
b. The rainy season can be sterilized for the warehouse, use anti-mildew anti-bacterial agent spraying walls, doors, windows, shelves these places, mopping, add 5% anti-mildew anti-bacterial agent in the water mopping.
c. Install temperature and humidity table, when the humidity outside the warehouse is greater than the humidity inside the warehouse, the doors and windows will be closed, and vice versa, open the air.
4. Transportation control
a. Detect whether the container is seeping water.
b. Sea export of stainless steel products, pay special attention to the container moisture, you can hang a drying rod in the container.
c. Clean the container before loading.